groovy sh脚本中转义符问题

wangzilun

2021-11-19 638a21882e683e376b8b5da74648717c98ac5b48

 Jenkinsfile

@@ -28,7 +28,36 @@
        }
        stage('test') {
            steps {
                sh 'echo ${GIT_BRANCH}'

                sh '''
                    #定义颜色的变量
                    RED_COLOR='\\E[1;31m'   #红
                    GREEN_COLOR='\\E[1;32m' #绿
                    YELOW_COLOR='\\E[1;33m' #黄
                    BLUE_COLOR='\\E[1;34m'  #蓝
                    PINK='\\E[1;35m'        #粉红
                    RES='\\E[0m'

                    #需要使用echo -e
                    echo -e  "\${RED_COLOR}======red color======\${RES}"
                    echo -e  "\${YELOW_COLOR}======yelow color======\${RES}"
                    echo -e  "\${BLUE_COLOR}======green color======\${RES}"
                    echo -e  "\${GREEN_COLOR}======green color======\${RES}"
                    echo -e  "\${PINK}======pink color======\${RES}"
                    echo "#######################################"
                    #直接把echo -e放到变量里面，使用的时候直接输出变量即可
                    SETCOLOR_SUCCESS="echo -en \\\\033[1;32m"
                    SETCOLOR_FAILURE="echo -en \\\\033[1;31m"
                    SETCOLOR_WARNING="echo -en \\\\033[1;33m"
                    SETCOLOR_NORMAL="echo -en \\\\033[0;39m"
                    echo ----成功了！-----  &&  \$SETCOLOR_SUCCESS
                    echo ----失败了！-----  &&  \$SETCOLOR_FAILURE
                    echo ----需注意！-----  &&  \$SETCOLOR_WARNING
                    echo ----正常的！-----  &&  \$SETCOLOR_NORMAL

                    echo "BRANCH ${GIT_BRANCH}"
                    printenv
                   '''
                test("${project_name}","${GIT_CREDENTIALS_ID}","${url}","${GIT_BRANCH}")
            }
        }